Experimental survey of static pressure in stepped chutes with inclined and horizontal steps equipped with end sills in nappe and skimming flow regimes
1 Civil Engineering, Four Seasons Sunrooms, Toronto, ON, Canada.
2 Civil and Environmental Engineering Department, Florida International University, Florida, USA.
3 Water and Wastewater, WSP Canada, Toronto, ON, Canada.
Research Article
World Journal of Advanced Engineering Technology and Sciences, 2023, 08(02), 034–040.
Article DOI: 10.30574/wjaets.2023.8.2.0069
Publication history:
Received on 16 January 2023; revised on 01 March 2023; accepted on 04 March 2023
Abstract:
A spillway is one of the most important parts of a dam for controlling floods. Among different types of spillways, stepped spillways are one of the best energy dissipaters. Due to technological advances and the satisfaction of two elements for safe and low-cost construction, the use of stepped spillways has increased widely. Due to this, more studies are focused on stepped spillways. Researchers have made some efforts and proposed different methods to improve structural efficiency to dissipate energy. Modifications on step geometry, regarding flow regime type, are one of these efforts. Flow pressure and its fluctuations on the steps of the stepped spillways is one of the main factors affecting structural design and safety. In this experimental research, reverse inclined steps combined with the end sills have been applied in four degrees [0o (horizontal), 5o, 8o, and 11o] to obtain static pressure in both the nappe flow and skimming flow regimes of stepped spillways. Static pressure obtained from reverse inclined steps with end sills have been compared to the amount in the horizontal step. Results indicate a slight increase in the energy loss rate when reverse inclined steps have been applied in the nappe flow regime of stepped spillways.
Keywords:
Static pressure; Stepped spillway; Nappe and skimming flow; Inclined step together with end sill
Full text article in PDF:
Copyright information:
Copyright © 2023 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0