Home
World Journal of Advanced Engineering Technology and Sciences
International, Peer reviewed, Referred, Open access | ISSN Approved Journal

Main navigation

  • Home
    • Journal Information
    • Abstracting and Indexing
    • Editorial Board Members
    • Reviewer Panel
    • Journal Policies
    • WJAETS CrossMark Policy
    • Publication Ethics
    • Instructions for Authors
    • Article processing fee
    • Track Manuscript Status
    • Get Publication Certificate
    • Issue in Progress
    • Current Issue
    • Past Issues
    • Become a Reviewer panel member
    • Join as Editorial Board Member
  • Contact us
  • Downloads

ISSN: 2582-8266 (Online)  || UGC Compliant Journal || Google Indexed || Impact Factor: 9.48 || Crossref DOI

Fast Publication within 2 days || Low Article Processing charges || Peer reviewed and Referred Journal

Research and review articles are invited for publication in Volume 18, Issue 2 (February 2026).... Submit articles

A geotechnical approach to gully erosion control and management at Inyishi, Ikeduru L.G.A., Imo State, Nigeria

Breadcrumb

  • Home
  • A geotechnical approach to gully erosion control and management at Inyishi, Ikeduru L.G.A., Imo State, Nigeria

Obi L.E. 1, * and Uwanugo R.G. Uchejiora 2

1 Civil Engineering Department, Imo State University, Owerri, Nigeria.
2 Civil Engineering Department, ChukwuemekaOdumegwuOjukwu University, Anambra State, Nigeria.

Research Article
 
World Journal of Advanced Engineering Technology and Sciences, 2020, 01(02), 063-070.
Article DOI: 10.30574/wjaets.2020.1.2.0032
DOI url: https://doi.org/10.30574/wjaets.2020.1.2.0032

Received on 05 December 2020; revised on 13 December 2020; accepted on 15 December 2020

This research is aimed at appraising the root causes of gully erosion at Inyishi in Ikeduru Local Government Area of Imo State, Nigeria, and the possible geotechnical control and management techniques that could be applied in curbing the menace. In pursuance to these objectives, field and laboratory investigations were undertaken. The field works involved reconnaissance and chain surveys, and contouring of the gully catchments. It was observed that gullies were initiated in the research area by flow concentrations induced by environmental factors related to roads and aligned buildings constructed with inadequate drainage facilities upstream of the gully locations. Laboratory investigations carried out involved engineering analyses of soil samples collected at the gully sites and beds for the determination of the soils grain sizes, Atterberg limits, moisture content, specific gravity, permeability, shear strength and bulk density relations. A summary of the engineering properties of the soil revealed its poorly graded and sandy nature, its inadequate fine materials content, low liquid and plastic limits, which ranged between 35.80 to 42.20 % and 28.35 to 35.00 % respectively, as well as its low permeability index of 1 × 10-2cm/sec. These findings, coupled with the fact that the gully area was underlain with friable and cohesionless soil, with small time of concentration, which renders it easily disaggregated by runoff are pointers to the relative ease of water infiltration and seepage at the gully locations. The erosive power of the slope within the gully area was estimated by chain surveying of the entire catchment. The efficacy of natural local materials such as vetiver grass, wood shavings, palm kernel shells, coconut husk, bread fruit husk, dead plant mulch, etc. for the geotechnical works on gully erosion control and management was explored. General specifications on the geotechnics of managing the installed control works for their sustainable services were proffered.

Erosion; Gully; Geotechnical; Reconnaissance; Contouring; Catchments

https://wjaets.com/sites/default/files/fulltext_pdf/WJAETS-2020-0032.pdf

Preview Article PDF

Obi L.E, and Uwanugo R.G. Uchejiora. A geotechnical approach to gully erosion control and management at Inyishi, Ikeduru L.G.A., Imo State, Nigeria. World Journal of Advanced Engineering Technology and Sciences, 2020, 01(02), 063-070. Article DOI: https://doi.org/10.30574/wjaets.2020.1.2.0032

Get Certificates

Get Publication Certificate

Download LoA

Check Corssref DOI details

Issue details

Issue Cover Page

Editorial Board

Table of content


Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.


Copyright © 2026 World Journal of Advanced Engineering Technology and Sciences

Developed & Designed by VS Infosolution